34
D AT E - T I M E: press E N T E R to display the
time already set. The set time will begin to
blink and using the
▼ ▲
arrow keys, it is pos-
sible to change the hour. Press E N T E R t o
pass on to the minutes setting, repeat the set-
ting operation using the arrow keys, then
press E N T E R to confirm and to pass on to the
day of the week. Use the arrow keys to chan-
ge the day setting and confirm with the
E N T E R k e y. To return to the I N S TA L L AT I O N
menu, press R E S E T and to quit the program-
ming phase, press R E S E T again (the machi-
ne display will read MACHINE READY) .
PROGRAMM. ON-OFF: press E N T E R t o
display the day of the week and the program
status (machine ON and OFF times or alter-
n a t i v e l y, the DAY OFF). If the weekly day off
is set and you wish to set the ON-OFF times,
press E N T E R followed by R E S E T and the
previously set times will appear on the
d i s p l a y. Use the
▼ ▲
arrow keys to change
the hour and press E N T E R to confirm and to
pass on to the minutes setting. Use the
▼ ▲
arrow keys to change the minutes and press
E N T E R to confirm and to pass on to the fol-
lowing day. PLEASE NOTE: To set or change
the weekly day off, you must display the day
required and press E N T E R. Press R E S E T
from the line displaying the ON - OFF times
and the display will read DAY O F F. Press
E N T E R to confirm and to pass on to the fol-
lowing day. When all times and the weekly
day off have been set, you can return to the
PROGRAMM. ON-OFF menu by pressing
R E S E T. To return to the I N S TA L L AT I O N
menu, press R E S E T and to quit the program-
ming phase, press R E S E T again (the machi-
ne display will read MACHINE READY) .
DISCHARGE TIME: Press ENTER, the pilot
lights on the programmable keys will begin
to blink; press one of these keys and use the
arrow keys
▼ ▲
to set the desired time. To
confirm the setting, press E N T E R. Repeat
this operation for the remaining keys. To exit
the programming function, press RESET.
To return to the I N S TA L L AT I O N f u n c t i o n ,
press R E S E T and to exit the programming
function press RESET again (the display will
read MACHINE READY).
DISCHARGE OPTION: press the E N T E R
key once to display the set number. Use the
arrow keys
▼▲
to choose from the options
FREE DISCHARGE or WITH DRAW E R.
When choosing the function W I T H
DRAWER, press ENTER to programme the
DREGS NR.. Use the arrow keys
▼ ▲
t o
change the number of coffee grounds (min.
20, max. 40), and press E N T E R to confirm
this selection. When choosing the F R E E
D I S C H A R G E function (grounds fixed at
200), press E N T E R to confirm. To exit the
programming function press R E S E T ( t h e
display will read MACHINE READY).
CHOOSE LANGUAGE: Press E N T E R a n d
use the arrow keys
▼ ▲
to choose from the
options E N G L I S H or I TA L I A N. To confirm this
setting, press E N T E R. To return to the
I N S TA L L AT I O N function, press R E S E T a n d
to exit the programming function press R E S E T
(the display will read MACHINE READY) .
M A N U A L S TO P: Available only in the
S E L F S E RVICE version push ENTER a n d
through
▼ ▲
arrows, select “ENABLED”
(allowing manual stop through the same
botton) or “NOT ENABLED” (excluding
manual stop).
PROG. STANDARD.: There are five ways to
input standard programming functions:
One: Hold down the E N T E R key for 5
seconds. The display will read COFFEE
DOSES and, after 5 seconds, the machine will
return to the MACHINE READY status, inser-
ting all standard doses, times and settings.
Two: Press the E N T E R key once. T h e
display will read COFFEE DOSES. Press
the ENTER key once more to confirm, then
set coffee delivery times and the standard
hot water delivery times. The machine will
automatically return to the PROG. STA N-
D A R D function. To return to the M A C H I N E
READY status, press the RESET key twice.
Three: Press the E N T E R key once. T h e
display will read COFFEE DOSES. Press
the
▼
key and the display will read MILK
TIMES. Press ENTER to confirm and to set
the standard times for cappuccino, white cof-
fee and hot milk. The machine will automati-
cally return to the PROG. STANDARD func-
tion. To return to the MACHINE READY
status, press the RESET key twice.
Four: Press the E N T E R key once. T h e
display will read COFFEE DOSES. Press
the
▼
key twice and the display will read
DISCHARGE TIMES AND GRINDING.
Press ENTER to confirm and to set the stan-
dard times for coffee grounds discharge and
for coffee grinding. The machine will auto-
matically return to the PROG. STA N D A R D
function. To return to the M A C H I N E
READY status, press the RESET key twice.
Five: Press the E N T E R key once. T h e
display will read COFFEE DOSES. Press
the
▼
key three times and the display will
read VARIOUS SETTINGS. Press E N T E R
to confirm and to set the standard variables
for all other functions. The machine will
automatically return to the PROG. STA N-
DARD function. To return to the MACHINE
READY status, press the RESET key twice.
