Simex multicon cmc-141, Руководство пользователя

Страница: 75 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Displaying parameter block
The constant parameters of Displaying block are:
– Format - the logical channel data formats, which are:
• numeric – value in this channel is displayed as a number,
•
binary
– only for values:
'0'
for low state and
'1'
for high state,
•
time
– value in this channel is displayed as a time. Logical channel in time
Format will always considers its value as a number of seconds and base on this
and settings in
Time pattern parameter, the logical channel will calculate the
value to display,
– Time pattern – this parameter occurs only when Format parameter is set as time ;
it allows user to define time pattern at his will. Only restrictions are that higher units
have to be before lower units and different units have to be separated by colon
character. Allowed is to create units which contains any number of digits. When user
creates a pattern which is forbidden, the device will detect it and set the pattern as
default.
– Precision – this parameter occurs when Format parameter is set as numeric or
time , which specifies the precision to be displayed on the output value (see
Fig. 7.39 ),
– Off-state text – this parameter occurs when Format parameter is set as binary ,
when the input value is
≤ 0
the value is replaced by the text defined by the user,
default settings text is:
OFF
,
– On-state text - this parameter occurs when Format parameter is set as binary ,
when the input value is >0 the value is replaced by the text defined by the user,
default settings text is: ON ,
The text of Off-state and On-state can be:
• text with black font such as: ALARM, off, OK,
• text using numbers and special characters such as: ALARM_ #12
• text using font color and / or a background color for example:
• no text, only a rectangle with the selected color - the width of the rectangle on
the screen is defined by pressing the
Spacebar (empty string), and the color of
the rectangle is the background color, for example:
– Digits - this parameter occurs when Format parameter is set as numeric , allowing
user to choose the part of the number that is to be the value of the logical channel
displayed on the screen,
75