Simex multicon cmc-141, Руководство пользователя

Страница: 70 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Lets assume that our temperature range is from -50˚C to 85˚C (but this range is arbitrary). In
that case:
– Scale parameter set as linear ,
– enter Configure scaling submenu:
•
in Output unit parameter write: ˚F ,
•
in Input value parameter for Point 1 block write: -50 (which is low range limit),
•
in
Output value
parameter for
Point 1
block write:
-58
(according to the
formula),
•
in Input value parameter for Point 2 block write: 85 (which is low range limit),
•
in Output value parameter for Point 2 block write: 185 (according to the
formula),
Fig. 7.33. Example of scaling configuration
c) offset – after choosing this option, parameter appears:
•
Configure scaling – function, which allows to add a constant value to input
value. It is given by formula:
In this function, there are following parameters:
•
Input unit – read only parameter, it displays unit of the logical channel
source,
•
Value to add – it defines offset value,
d)
user char.
- is defined as set of X-Y points. Number of the points is variable and may
be set from 2 to 20 points which make linear segments (see
Fig. 7.34
). After
choosing this option, parameter appears:
•
Configure scaling – submenu which allows to define further points of the
user characteristic. There are following parameters:
◦
Input unit – read only parameter, it displays unit of the logical channel
source,
◦ Output unit – unit of rescaled data,
70
y
=
x

offset
1
2
3
4