Simex multicon cmc-141, Руководство пользователя

Страница: 183 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.106. An example of the waveform
In the first step you need to configure the Profile/timer. To do this:
– touch screen and press the Menu button,
– press the Device configuration button,
– enter the Profiles/timers menu,
– using the arrows in the top navigation bar, select any
Profile/timer
such as
1
,
– in
Name
parameter write
Profile 1
,
– Triggering mode parameter set as edge (once) ,
– Triggering source parameter set as Logical channel 2 ,
– in Idle value parameter write 0 , because we want at the beginning the Profile has 0
value on the output,
– enter the
Section list
submenu to define the sections:
•
press the green plus at the bottom left side of the screen to configure
Section num.1
:
◦ in Duration parameter write 5 sec.,
◦ Unit parameter set as second ,
◦ Shape parameter set as ramp ,
◦ in
Final value
parameter write
10
,
•
press the green plus at the bottom left side of the screen to configure
Section num.2
:
◦ in Duration parameter write 2 sec.,
◦ Unit parameter set as second ,
◦ Shape parameter set as conts.value ,
◦ in
Final value
parameter write
8
,
•
press the green plus at the bottom left side of the screen to configure
Section num.3
:
◦ in Duration parameter write 3 sec.,
◦ Unit parameter set as second ,
◦ Shape parameter set as ramp ,
◦ in Final value parameter write 4 ,
•
press the green plus at the bottom left side of the screen to configure
Section num.4
:
◦ in Duration parameter write 1 sec.,
◦ Unit parameter set as second ,
◦ Shape parameter set as const.value ,
◦ in Final value parameter write 4 ,
183
0 2 4 6 8 10 12
0
2
4
6
8
10
12
Time [s]
V
a
lu
e