SFX-9 Video Mixer
Basic Operations
16
To Try a Typical MIX (Dissolve)
Step 1
Push the Video Source Select slide to the top “A”
position.
Step 2
Select any video input to be Source A by pushing the
appropriate button(s).
Note
: To select S-Video #3 press both end buttons at the same time.
To select S-Video #4 press the middle and far right button at
the same time. Red LED lights indicate which input is
selected. (Video #1 is selected in the example at right.)
Step 3
Select any video input to be Source B by pushing the
appropriate button(s).
(Background color is selected as
Source B in the example at right.) Move the slide control
between the “A” and “B” positions to view the two source
images.
Source Selection
Step 4
Press the MIX button (yellow) in the MODE CONTROL
panel.
TIP:
MODE controls determine the type of transition you want to
make between Source A and Source B. The MIX selection
lets you dissolve from one image into another smoothly and
gradually. Use the MIX mode to fade to and from black.
Mode Selection
Step 5
Move the slide control from “Source A” to “Source B” to
make the transition.
The example (bottom right) shows an
A to B mix.
TIP:
The speed of the mix is determined by the speed with which
you move the control slide. Also, after completing the mix,
you can change the input for Source A and then return the
slide to the A position to dissolve into a new image.
Mix
B
A
