Sim2 40-50-ST, Руководство пользователя и инструкция по установке

Страница: 31 / 175

MICO 40-50-ST
MiCO 50
28
LED Over Temperature Alarm
The LED over temperature alarm on the control panel alerts you when the LED light source becomes too hot or the
peripheral is sultry.
If the Red and Blue LED illuminates during operation, the LED will shut off and the cooling fans will continue to run for
approximately 10 seconds. You should ensure that the airflow around the projector is sufficient, and ensure that the
projector has proper ventilation.
When the over temperature LED lights up, a warning also appears on the screen.
The over temperature alarm LED on the control panel alerts you when the ambient temperature
is too hot. If the LED blinks twice blue then one red during operation, the LEDs will shut off and
the cooling fans will continue to run for approximately 15 seconds. You should ensure that the
airflow around the projector is sufficient, and ensure that the projector has proper ventilation.
When the over temperature LED lights up, a warning also appears on the screen.
ESC SOURCE MENU
Red lED Blue lED
English
MiCO 50
29
Computer Compatibility Chart
Multiple signal support
•
Horizontal Frequency: 25-91 kHz, Vertical Frequency: 24-85 Hz, Pixel Clock: 25-162 MHz
•
XGA, SXGA, UXGA compatible with advanced intelligent compression
•
The following is a list of modes that conform to VESA. However, this projector supports other signals that are not
•
VESA standards.
PC/
MAC/
WS
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
VESA
Standard
HDMI
Support
PC
DOS 720 x 400 31.5 70
P
VGA 640 x 480
31.5 60
P
37.9 72
P
37.5 75
P
43.3 85
P
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
VESA
Standard
HDMI
720 × 480 31.5 60
720 × 576 31.3 50
1280 × 720
45 60
37.5 50
1920 × 1080i
33.8 60
28.1 50
1920 x 1080p
27 24
56.3 50
67.5 60
PC/
MAC/
WS
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
VESA
Standard
HDMI
Support
PC
SVGA 800 x 600
35.1 56
P P
37.9 60
48.1 72
46.9 75
53.7 85
XGA 1024 x 768
48.4 60
P P
56.5 70
60.0 75
68.7 85
SXGA 1280 x 1024
64.0 60
P P
80.0 75
91.1 85
WSXGA 1680 x 1050 65.2 60
P P
UXGA 1600 x 1200 75.0 60
P P
MAC
13”
VGA 640 x 480 34.9 67
P
MAC
16”
SVGA 832 x 624 49.6 75
P
MAC
19”
XGA 1024 x 768 48.4 60
P P
note
This projector may not be able to display images from notebook computers in simultaneous
•
(CRT/LCD) mode. Should this occur, turn off the LCD display and output the display data in
“CRT only” mode. Details on how to change display modes can be found in your notebook
computer’s operation manual.
When projecting video images of an interlace video signal, the intended image may not be
•
projected when using the RBG input. In such cases, use the Component input, S-Video input
or Composite input.