9
GB
7. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
~
Pull out the mains plug
4
from the wall
socket before cleaning the Nutrition
Mixer.
~
The base unit
1
and the power cable
with the mains plug
4
must not be im-
mersed in water or other liquids.
DANGER! Risk of injury from
cutting!
~
When washing by hand, the water
should be clear enough for you to see
the blades of the blade attachment
8
/
9
easily.
WARNING! Risk of material damage!
~
Do not use any astringent or abrasive
cleaning agents.
After every use
• Clean the device and all individual
parts used after each use and remove
all food residues.
• Prior to cleaning, all parts must be sepa-
rated from one another (e.g. remove To-
Go lid or keep-fresh lid
10
from blender
jug
5
-
7
).
Base unit
Wipe off the base unit
1
and the power ca-
ble
4
, using a lightly moistened cloth. Dry
with a dry cloth.
Manual cleaning
1. The accessories (blade attachments
8
/
9
, blender jugs
5
-
7
, and To-Go
lids or keep-fresh lids
10
) can be
cleaned with warm water and a little
detergent.
2. Afterwards, rinse all parts with clean
water.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Dishwasher
The following parts can be cleaned in the
dishwasher:
-
the blade attachments
8
/
9
-
the blender jugs
5
-
7
-
the To-Go lids and keep-fresh lids
10
8. Storage
DANGER for children!
~
Keep the device out of the reach of chil-
dren.
DANGER!
~
In order to avoid accidents, the mains
plug
4
must never be connected to a
wall socket while in storage.
•
Figure D:
wind the power cable
4
around the cable spool
3
at the under-
side of the device.
• Select a location where neither high
temperatures nor moisture can affect the
device.
__326494_Nutrition Mixer_B7.book Seite 9 Montag, 15. Juli 2019 12:15 12