- 9 -
Improving the transmission quality
You can try the following measures to im-
prove the quality in event of transmission
disruptions:
Change the position and/or direction
•
of the transmitter
q
and/or receiver
d
.
For problems with the remote control
•
signal quality change the position of
the infrared cable's
2#
transmission
diodes to the infrared receiver of the
signal source.
Try setting one of the other 4 trans-
•
mission channels via the CHANNEL
switch
s
and
l
.
Channel configuration
(parallel operation)
You can operate up to 4 radio transmis-
sion sets within close proximity of each
other. Then you select, for each set, their
own channel from the 4 different avail-
able channels.
Expansion options
Expand the radio transmission set by
connecting multiple transmitters
q
or
receivers
d
.
Note:
If you want to control a receiver
d
selectively with several transmitters
q
you should never have several trans-
mitters switched on at the same time.
This prevents transmission disruptions.
Transmitter
Receiver
Cleaning
Risk of electric shock!
Disconnect the wall plug transformer
(
1(
) from the mains power socket
when you want to clean the radio
transmission set.
Important!
Chemical cleansers may damage the
radio transmission set.
Clean the radio transmission set only
with a slightly damp cloth.
Troubleshooting
If a problem arises, please check the fol-
lowing table first. If the problem cannot
be resolved please contact one of the
listed service locations.
No audio/video transmission
Are the transmitter
>
q
and receiver
d
switched on?
Are the transmitter channel switch
>
s
and the receiver channel switch
l
set to the same channel?
The range of the radio transmission
>
set is reduced by walls and ceilings.
Reduce the distance between the
transmitter
q
and the receiver
d
.
IB_KH2130_DT35269_LB4BC.indb 9
IB_KH2130_DT35269_LB4BC.indb 9
04.09.2009 13:10:07 Uhr
04.09.2009 13:10:07 Uhr