- 6 -
The device components
Fig. A: The transmitter:
q
Transmitter
w
LED status indicator
e
Switch ROOM 1
r
Switch ROOM 2
t
Infrared connection socket (IR)
y
Output for a TV
u
AV input 2
i
AV input 1
o
Connection socket
a
Transmitter's on/off switch
s
Transmitter channel toggle switch
(on the underside of the device)
Fig. B: The receiver:
d
Receiver
f
Infrared receiver
g
LED operating indicator
h
Audio/Video CINCH outputs
j
Connection socket for the supply
voltage
k
Receiver's on/off switch
l
Reception channel switch (bottom
of device)
1(
Wall plug transformer (2 pieces)
2)
CINCH—3,5mm jacks cables (2 pieces)
2!
SCART—CINCH adapter "IN"
2@
SCART—CINCH adapter "OUT"
2#
Infrared cable with 3 transmit diodes
2$
AUDIO adapter 3.5 mm mini-stereo
to CINCH female
2%
CINCH—CINCH cable
Putting the device into use
First take all device components from the
packaging and remove all packing foil
and tape.
Important notice:
Even when the system (trans
receiver) is switched off, the manufac-
turer still recommends disconnecting
the wall plug transformer from the
mains power or using a power strip
with a shut-off switch. Only in this way
is complete switch off assured thus
contributing to economical consumer
attitude.
Connecting the transmitter
Note:
You can connect two signal sources.
The signal to be transmitted can be
selected via a switch on the front
panel of the transmitter. Thereby the
radio transmission set can transmit the
image and sound signals of every de-
vice that emits a sound and/or video
signal via a suitable connection:
• DVD Player / CD Player
• VCR
• Television
• SAT receiver/set top box
• Video camera
• Computer video card, etc.
Connecting signal sources to the
transmitter:
On devices with cinch outputs for the
•
audio and video signals you connect
these via one of the supplied CINCH—
3,5mm jack cables
2)
to the socket
"AV IN 1"
i
on the rear panel of the
transmitter
q
.
IB_KH2130_DT35269_LB4BC.indb 6
IB_KH2130_DT35269_LB4BC.indb 6
04.09.2009 13:10:07 Uhr
04.09.2009 13:10:07 Uhr