Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 44
SCW001 User Manual
Field
Description
Service Type/User
Defined
Enter the service name.
Filter Service For
It determines the computers to be blocked.
•
Only This IP Address: Only one network card on a computer is blocked. You
need to enter the IP address of a network card on a computer.
•
IP Address Range: Network cards that corresponding to a range of IP address-
es are blocked. You need to enter the starting and ending addresses of the IP
address range.
•
All IP Address: Network cards of all computers are blocked.
After setting, click Add to add a new rule. Then, click Apply to save the settings in the Block Services page.
6.6.3 QoS Setup
Choose Access Control > QoS Setup and the QoS Setup page appears.
The QoS function sets priority policies on applications, online games, Ethernet LAN ports, and MAC ad
-
dresses, sets an order for various network traffics, and thus optimizes your network performance.
The following table describes parameters in the QoS Setup page:
Field
Description
Enable WMM (Wi-Fi
multi-media) Settings
Enable or disable WMM. Wireless Multimedia (WMM) is a subset of the 802.11e
standard. It supports setting priorities of wireless traffics according to data types
within a certain range. Time-related information such as audio and video has
higher priority than normal data. To ensure proper performance of WMM, wire-
less clients must support WMM.
Turn Internet Qos Ac-
cess On
Enable or disable QoS. After it is enabled, you can optimize the network access
traffics according to the settings in the QoS Priority Table page.
Turn Bandwidth Con-
trol On
Set the maximum uplink bandwidth at the WAN port.
If the value is in units of Kbps, the maximum value is 1000. If the value is in units
of Mbps, the maximum value is 100.
