Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 22
SCW001 User Manual
The submenu contains LAN Interface Settings and WAN Interface Settings.
6.3.1 LAN Interface Settings
Choose Network Settings > LAN Interface Settings and the LAN Interface Settings page appears.
In this page, you can configure the parameters of the LAN port. You can modify the IP address of the LAN
port according to the actual network environment.
The following table describes parameters and buttons in this page:
Field
Description
IP Address
Set the IP address that a LAN user uses to access the router. The default IP is
192.168.1.1. You can change it if necessary.
IP Subnet Mask
Subnet mask of the LAN port. You can enter a different subnet mask according to
the actual network status.
RIP Direction
The mode in which the router sends and receives RIP packets. If it is set to Both or
Out Only, the router periodically broadcasts its routing table. If it is set to Both or
In Only, the router integrates the received routing tables.
RIP Version
The format of the RIP packets and broadcast mode that the router sends them.
RIP-1 is universally supported. Routing data sent by using RIP-2B or RIP-2M is in
RIP-2 format. RIP-2B uses subnet broadcast and RIP-2M uses multicast.
Use Router as DHCP
Server
If it is selected, the router serves as the DHCP server and automatically assigns IP
addresses for all connected computers.
Starting IP Address
The first address in a consecutive IP address pool.
Ending IP Address
The last address in a consecutive IP address pool.
