Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 38
SCW001 User Manual
Field
Description
Edit Service
Click the button to edit a service entry in the Ports - Custom Service page that is
displayed.
Delete Service
Delete a service entry.
Add Custom Service
If the list does not contain your desired service, click the button to add a service
in the Ports - Custom Service page that is displayed.
Click the Add Custom Service button and the Ports - Custom Service page appears:
The following table describes parameters in this page:
Field
Description
Service Name
Select a service type from the drop-down list.
Protocol
Indicate the protocol that is used at the mapping port. You can select TCP/UDP,
TCP, or UDP.
Starting Port
After the connection to the mapping port is established, the corresponding port is
open and the application can initiate consequent connection requests to the open
port.
Ending Port
Set the end port of the mapping port range.
Server IP Address
Enter the IP address of the computer on which the service is to be provided.
After setting, click Apply to save the settings.
6.5.2 Port Triggering
Certain applications, such as WAN network games, video conferences, and network calls, require multiple
connections. Because of the firewall setting, these applications cannot work on a simple NAT router. How
-
ever, certain special applications enable the applications to work on a NAT router. When an application
sends a connection request to a trigger port, the corresponding ports are open, for later connection and
service provision.
Choose Forwarding Rule > Port Triggering and the Port Triggering page appears.
