manualshive.com logo in svg

Silicon Graphics Origin 350, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Origin 350 Скачать руководство пользователя страница 264

238

007-4566-001

B: Regulatory Specifications and Safety Information

Electromagnetic Emissions

This section provides the contents of electromagnetic emissions notices for various
countries.

FCC Notice (USA Only)

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may
cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case you
will be required to correct the interference at your own expense.

If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, you are encouraged to try to
correct the interference by using one or more of the following methods:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications to the equipment not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

!

Содержание Origin 350



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды