manualshive.com logo in svg

Silicon Graphics Origin 350, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Origin 350 Скачать руководство пользователя страница 168

142

007-4566-001

4: Memory and PCI Expansion (MPX) Module

•

NUMAlink 3 LED.

 The NUMAlink 3 connector has two LEDs. These LEDs are

located to the right of the NUMAlink 3 connector. One LED lights yellow to
indicate that the MPX module and the module to which it is connected are
powered on. The other LED lights green when the link between the MPX
module and the module to which it is connected is established.

•

PCI/PCI-X slots (bus 1, slot 1; bus 1, slot 2; bus 2, slot 1; bus 2, slot 2).

 These slots

are labeled from bottom to top

PCI 1

,

PCI 2

,

PCI 3

, and

PCI 4

. Two of these slots are

on one bus, and two slots are on another. These 64-bit slots can contain 33-MHz and
66-MHz PCI cards, or 66-MHz and 100-MHz PCI-X cards. (For an updated list of
supported cards, see SGI Supportfolio at http://support.sgi.com.)

Note:

If you run PCI and PCI-X cards on the same bus at the same time, the PCI-X

card will run on PCI mode. And if you run cards of different speeds on the same bus,
the highest speed card will run at the speed of the slower card. For example, if a card
is running at 100 MHz in one slot of a bus, and a card is running at 33 MHz in the
second slot of the same bus, both cards will run at 33 MHz.

System Configurations

This section lists the internal MPX module configuration options such as the number of
DIMMs that can be installed in the MPX module to increase its local memory.

This section also lists external MPX module configuration options that can enhance the
performance of the Origin 350 server system. For example, the a server system
configuration can include an MPX module together with a base compute module, a 2U
SGI TP900 storage system to expand storage, and a PCI expansion module to increase
I/O capabilities.

Internal Configurations

PCI and PCI-X cards and memory (DIMMs) are the configurable internal components of
the MPX module.

As a customer, you can configure PCI and PCI-X cards and memory. See Chapter 4,
“Installing and Removing Customer-replaceable Units,” for information about installing
and removing these items to reconfigure your MPX module.

Содержание Origin 350



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды