manualshive.com logo in svg

Silicon Graphics Origin 350, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Origin 350 Скачать руководство пользователя страница 181

007-4566-001

155

Chapter 6

6.

Installing and Removing Customer-replaceable
Units

This chapter provides safety instructions to follow when using and maintaining your
system. It also describes how to install and remove module customer-replaceable units
(CRUs). This information is covered in the following sections:

•

“Safety Instructions” on page 155

•

“PCI and PCI-X Cards” on page 157

•

“Disk Drives” on page 176

•

“Power Supplies” on page 181

•

“Memory” on page 186

•

“L1 Controller Display” on page 196

Safety Instructions

Before you perform any type of maintenance to your system, read the following safety
instructions:

•

Follow all warnings and instructions marked on the product and noted in this and
other documentation included with the product.

•

Unplug this product from the wall outlet before you clean it. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.

•

Do not use this product near water.

•

Do not place this product or components of this product on an unstable cart, stand,
or table. The product may fall, causing serious damage to the product.

Содержание Origin 350



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды