manualshive.com logo in svg

Silicon Graphics Origin 350, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Origin 350 Скачать руководство пользователя страница 2

CONTRIBUTORS

Written by Francisco Razo
Illustrated by Dan Young and Chrystie Danzer
Production by Karen Jacobson
Contributions by Charles Alexander, Dick Brownell, David Diederichs, Steve Ewing, Mike Grayson, Patrick Heintz, Nancy Heller, Matt Hoy,

Brad Juskiewicz, Jusson Koo, Art Ordonio, Paul Pedersen, Gilles Perrenoud, Mike Petersen, Hao Pham, Keith Rich, German Rico, Bob Sanders,
Mark Schwenden, Bruce Shifrin, Gary Spilde, Brian Stickney, Benjie Sun, and Michael Wright.

Cover Design by Sarah Bolles, Sarah Bolles Design, and Dany Galgani, SGI Technical Publications

COPYRIGHT

© 2003, Silicon Graphics, Inc. All rights reserved; provided portions may be copyright in third parties, as indicated elsewhere herein. No
permission is granted to copy, distribute, or create derivative works from the contents of this electronic documentation in any manner, in whole
or in part, without the prior written permission of Silicon Graphics, Inc.

LIMITED RIGHTS LEGEND

The electronic (software) version of this document was developed at private expense; if acquired under an agreement with the USA government
or any contractor thereto, it is acquired as “commercial computer software” subject to the provisions of its applicable license agreement, as
specified in (a) 48 CFR 12.212 of the FAR; or, if acquired for Department of Defense units, (b) 48 CFR 227-7202 of the DoD FAR Supplement; or
sections succeeding thereto. Contractor/manufacturer is Silicon Graphics, Inc., 1600 Amphitheatre Pkwy 2E, Mountain View, CA 94043-1351.

TRADEMARKS AND ATTRIBUTIONS

Silicon Graphics, SGI, the SGI logo, InfiniteReality, IRIX, Octane, Onyx2, and Origin are registered trademarks, and NUMAflex, NUMAlink,
SGIconsole, Supportfolio, VPro, and XIO are trademarks of Silicon Graphics, Inc., in the United States and/or other countries worldwide.

MIPS is a registered trademark of MIPS Technologies, Inc., used under license by Silicon Graphics, Inc.

Linux is a registered trademark of Linus Torvalds.

Содержание Origin 350



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды