manualshive.com logo in svg

SILENT KNIGHT 9500, Инструкция по установке и эксплуатации

Поделиться
Скачать
SILENT KNIGHT 9500 Скачать руководство пользователя страница 8

151059

1-1

Section 1
System Overview

This manual describes installation, operation, and programming of the Model 9500 Central 
Station Receiver (9500).  The 9500 is a dual-line desktop receiver. This section lists features, 
optional accessories, compatible formats, and SIA options supported. This section also 
includes conventions used in the manual, terminology relevant to this product, and other 
information.

1.1

Features

Hardware:

•

Supports both 120 and 240 VAC installations at 60 and 50Hz operation.

•

External annunciation with auxiliary Form C dry contact relay. (Programmable)

•

On-board PZT alert. (Programmable.)

•

1 parallel port and 2 serial ports.

•

2 rear SBUS connectors.

•

Modular configuration for easy replacement and repair.

•

4 line LCD Display with 20 characters for each line.

•

On-board touchpad for manual operation and programming.

•

LEDs to indicate system operations.

•

One line card will communicate with all supported formats.

•

Supports up to 2 line cards which operate independent of each other.

•

Line card parameters are stored on the MCPU for faster removal and replacement.

•

Line cards support Caller ID and Caller Name Delivery.

•

Line cards are individually programmable for format priority and ring parameters.

•

Line cards support direct connect phone line monitoring.

•

English or Spanish language display.

Содержание 9500



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды