SILENT KNIGHT 9500, Инструкция по установке и эксплуатации

Страница: 107 / 162

Model 9500 Central Station Receiver Installation/Operation Manual
5-42 151059
To Change the Number of Rings Follow These Steps:
This controls the number of rings the receiver needs to see before it will answer the call.
1. Follow the procedure in Section 5.5.2.2.
2. Press for Line Options menu.
3. The display will flash on the
Number of Rings
field.
4. Enter the desired value from the keypad (0-255) or press or to change the num-
ber of rings before the receiver will answer.
5. When the desired number of rings is flashing press or .
Note: If Caller ID (see Section 5.5.2.8) is turned on the number of rings must be set to 2.
To Change the Ring On Time (9810 only):
The “On” field controls the ring on time on 9810 line cards only. The ring on time is the length
of time the receiver will listen to a ring prior to recognizing it as a ring.
1. Follow the procedure in Section 5.5.2.2.
2. Press for Line Options menu.
3. Press until the display flashes on the
On Time
field.
4. Enter the desired value from the keypad or press or to change the ring on time.
Values range from 0 to 255 in increments of 50ms (1=50ms, 2=100ms, 3=150ms and so
on).
5. When the desired ring on time is flashing press or .