Silca MARKER 2000 Скачать руководство пользователя страница 36

Страница: 36 / 58

MARKER 2000

Operating manual - English

Fig. 28

WARNING: position the glass slide (P) over the key (fig. 28).

Place the clamp in the "tracking” position.

Move the disk (marking area) until glass slide No.1 is

selected. Superimpose the projected area on the

figure engraved on the template corresponding to

glass 1.

Use the arrow keys

When the area is properly superimposed, press F10

key to confirm.

The program automatically presents the second area.

Repeat the operations described above for the eight

glass slides available on the disk.

The software is designed to accept 16 different glass

slides; after gauging No.8, therefore, press key F10

eight times to complete the procedure.

When the new disk containing the new marking areas

is available, we recommend repeating the gauging

operations for all the glass slides from No.1 to 16.

When the glass slides have been gauged, the

position of each one is stored in the machine memory.

In this way, when the gauging operations are

repeated the co-ordinates of each glass slide are

maintained.

At the end of the procedure the program saves all the

set co-ordinates and returns to the following display:

Press ESC to return to the main menu.

sensore

0,4 mm

Place clamp

in tracking position.

(F10=Avanti)

Use arrows to place

area projected by

slide

over template.

(F10)

F10

Keyboard = IT
Srl No.= 123456789012345
Total pcs.= 0

Esc

Содержание MARKER 2000



























































Результаты поиска

Содержание MARKER 2000

Отзывы:

Похожие инструкции для MARKER 2000

Бренды по названию

Популярные бренды

Silca MARKER 2000, Руководство по эксплуатации

Результаты поиска

Содержание MARKER 2000

Отзывы:

Похожие инструкции для MARKER 2000

Бренды по названию

Популярные бренды