Silca MARKER 2000 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 58

background image

MARKER 2000

Operating manual - English

2

Copyright Silca 2002

GENERAL

MARKER 2000 has been designed according to the specifications of the Machine Directives.
From the design stage risks for the operator have been eliminated in all areas: transport, regulation,
marking and maintenance.
Other risks have been eliminated by the use of protective devices for the operator.
The material used in the manufacture of this machine and the components employed during use of the
machine are not dangerous and their use complies with standards.

U

SE

The electronic marker is designed for the marking of metals in general, brass, silvernickel, etc.
It must be installed and used in the way laid down by the manufacturer.
If the marker is used differently or for purposes different from those described in this manual, the customer
will forego any rights he may have over SILCA S.p.A. Furthermore, unforeseen danger to the operator or
any third parties may arise from incorrect use of the machine.

I

NCORRECT

USE

The marking of plastic materials in general, cardboard, etc. and negligence in the use of the machine or
failure on the part of the operator to observe the instructions given in this manual are not covered by the
guarantee and the manufacturer declines all responsibility in such cases.
It is therefore indispensable to read the operating manual carefully in order to make the best use of the
marker and benefit from its potential.

F

URTHER

RISKS

There are no further risks arising from the use of the MARKER 2000.

P

ROTECTION

AND

SAFETY

PRECAUTIONS

FOR

THE

OPERATOR

The MARKER 2000 is built entirely to standards. The operations for which it has been designed are easily
carried out at no risk to the operator.
The adoption of general safety precautions and observation of the instructions provided by the
manufacturer in this manual eliminate all human error, unless deliberate.
The MARKER 2000 is designed with features which make it completely safe in all parts.

•

Power supply

MARKER 2000 is supplied with electricity by means of an earthed plug and differential switch.

•

Start-up

The machine is started up by means of the master switch on the back.

•

Maintenance

The operations to regulate, service, repair and clean the machine have been devised in the simplest and
safest way possible. There in no danger of removable parts being replaced wrongly or unsafely.

•

Machine identification

The machine is provided with an identification label which shows the serial number (fig. 2).

Fig. 2

(*) see 11 "WASTE DISPOSAL", page 49.

«
...
4
5
6
7
8
...
»

Содержание MARKER 2000



























































Отзывы:

Нет отзывов

Похожие инструкции для MARKER 2000

Бренд: JVA Страницы: 22

VisionXS-IP-F-DP-UHR

Бренд: G&D Страницы: 148

PFE300SA Series

Бренд: TDK-Lambda Страницы: 19

Бренд: Status Страницы: 22

Бренд: Makita Страницы: 16

A-B Quality 1606-XLP30

Бренд: Rockwell Automation Страницы: 4

Бренд: Campbell Hausfeld Страницы: 32

Бренд: South bend Страницы: 90

Бренд: Image Industries Страницы: 32

Standard iControl

Бренд: Nordson Страницы: 6

Бренд: TREND Страницы: 19

Бренд: Parkside Страницы: 49

Бренд: Neilsen Страницы: 2

Бренд: YATO Страницы: 64

Бренд: Clas Ohlson Страницы: 52

Бренд: Yost Vises Страницы: 5

Бренд: M-system Страницы: 4

Бренд: El-Björn Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды