Silca Ilco Orion SMARTY 2000, Руководство по эксплуатации

Страница: 7 / 24

Operating manual - English SMARTY 2000
7
1 TRANSPORT
The SMARTY 2000 key-cutting machine is easily transported and is not dangerous to handle. The
packed machine can be carried by one person.
1.1 Packing
The SMARTY 2000 is packed in a strong cardboard box, the dimensions of which are shown in fig.3,
sufficiently robust to be used for storing the machine for long periods.Inside the box the machine is
enclosed in two expanded polymer shells. The shells and cardboard box ensure safe transportation and
protect the machine and all its parts.
Fig. 3
1.2 Transport
To avoid damaging the SMARTY 2000 it must always be transported in its packing case. This will
prevent sudden movements or rough handling from damaging the machine, persons or things.
1.3 Unpacking
To remove the machine from the packing box:
1) cut the straps with scissors and remove,
2) open the box without damaging it as it may be used again (e.g. removals, dispatch to the
manufacturers for repairs or servicing).
3) check the contents of the box, which should comprise:
- 1 SMARTY 2000 key-cutting machine packed in a protective shell;
- 1 set of documents, including: operating manual, spare parts list and guarantee;
- 1 carriage lever handle;
- tools;
- 1 safety device (supplied with the 230V machines);
4) remove the key-cutting machine from the protective shell.
1.4 Handling the machine
When the SMARTY 2000 has been unpacked, place it directly on its workbench.
This operation can be carried out by one person,
firmly holding the base, and no other part, to lift
and carry the machine .
430 mm
500 mm
330
mm
Keep dry This side up Handle with care