Silca Ilco Orion SMARTY 2000, Руководство по эксплуатации

Страница: 14 / 24

SMARTY 2000 Operating manual - English
14
5.5 Graphics
5.6 Separate parts
The separately packed parts must be installed on the SMARTY 2000 key-cutting machine by the
purchaser, as follows:
Carriage lever handle
Screw the handle (G1) onto the carriage lever (fig.4, page 8).
Power cable
First connect the safety device (X) (supplied with the 230V machines) to the key-cutting machine and
the power cable then connect the free end of the power cable to the power mains (fig.6).
Fig. 6
5.7 Removing the blocks
Remove the plastic block between the carriage and the machine body.
5.8 Connection to the mains
For the safety of the operator and the machine it is important to ensure that the machine is connected
to the proper mains voltage by means of an earthed differential switch.
THE USE OF PROTECTIVE GOGGLES
IS COMPULSORY
power cable
X
power
mains