Silca D411202XA, Руководство по эксплуатации

Страница: 8 / 30

LANCER PLUS Operating manual
4 Copyright Silca 1998
1.2 Transport
The symbols on the outside of the packing box show the ideal conditions for transport.
Use of the packing box whenever the machine is transported will avoid knocks or bumps which could
cause damage.
1.3 Opening the packing
To remove the machine from the packing box:
1) cut the straps with scissors and remove.
2) prise off the staples.
3) open the box without damaging it as it may be used again (removals, dispatch to the manufacturers
for repairs or servicing).
4) remove the machine as follows:
a) pull up the packing box.
b) remove the brackets anchoring the machine to base using the wrench (supplied with the ma-
chine).
c) when handling the machine (unpacking, lifting, moving) never grip the carriages or other sen-
sitive parts of the machine.
Always grip the bottom of the base
.
5) check the contents of the box, which should comprise:
- 1 LANCER PLUS key-cutting machine.
- 1set of documents including: operating manual, spare parts list and guarantee.
- 1connecting wire.
1.4 Handling the machine
When the LANCER PLUS has been unpacked, place it directly on its workbench.
This operation can be carried out by two persons,
firmly holding the base, and no other part, to lift
and carry the machine
.