Silca D411202XA, Руководство по эксплуатации

Страница: 17 / 30

LANCER PLUS Operating manual
Copyright Silca 1998 13
6 MACHINE REGULATION AND POSITIONING OF KEYS
6.1 Main carriage
Depending on the type of cut to be made the main carriage must be located in:
position 1:
to the left for flat, radiused lever cuts and flat steel keys;
position 2:
to the right for side and bullet wards.
The carriage is secured by lever (E).
Fig. 12
6.2 Jaws
The jaws are reversible guaranteeing perfect clamping
of both: bit keys and flat steel keys.
To change the jaw from one type of key to the other,
it’s necessary to loosen the jaw handle, lift the jaw and
rotate 180°.
Fig. 13
position
2
position
1
E
E