Siko MSA213C, Дополнение к первоначальной инструкции по установке, Страница: 21 / 28

MSA213C-S (BiSS/C)
Service mode (RS485 mode) English
MSA213C-S (BiSS/C) · Date 24.05.2022 · Art. No. 90036 · Mod. status 111/22
21
/A
B
0.5 W
A
120 Ohm
0.5 W
120 Ohm
/B
Fig. 2: Connection note
Signal sequence
With an interpolation rate of 1000, the period of output signal corre-
sponds to -> 1 μm with an interpolation rate of 2000.
With the sensor being moved in the cable outlet direction, signal B will be
lagging in relation to signal A by 90° (A before B).
1 µm
4 µm
B
A
/B
/A
7 Service mode (RS485 mode)
After activating the service mode of MSA213C via the "Config" input, the
sensor can be parameterized using a simple ASCII protocol under a termi-
nal program or status information can be queried, resp.
The SLO and NSLO connection pins are now available in a bidirectional
mode and are connected to a PC via an RS485/RS232 converter. Using a
terminal program, communication with the encoder is possible via a sim-
ple ASCII protocol.