EtherHaul™ 8000 Installation, Operation and Maintenance Manual
Page 39
Active Alarms – list of currently active alarms and date&time raised.
System Uptime – R/O field. Time elapsed from last power on.
History Log – System alarms and events history log.
User Activity Log – All configuration changes are logged, including user and
date&time (presented in the form of CLI commands).
3.4
Quick Configuration Wizard
Use the Quick Configuration wizard to configure the basic system parameters for both
local and remote systems. It holds the basic minimal configuration required to start
using the link.
The Quick Configuration wizard should be used for the initial system setup after
installation. For monitoring and advanced configuration, please refer to the dedicated
configuration pages of the Web-Based Management.
3.5
General Configuration Commands
3.5.1
Apply
Any configuration change is executed upon clicking
Apply
.
The Local-Remote concept of the Web-Based Management allows configuring both local
and remote systems of the link.
The
Apply
button is available at the bottom of each configuration page (one button for
both local and remote systems).
When clicking
Apply
, the configuration changes will be sent to remote system first and
then to the local system. If multiple parameters changed on the page before clicking
Note:
Actual Layer 1 throughput depends on product's specs. Refer to the product’s
Release Notes for exact specifications.
Note:
To view logs, pop-ups must be enabled and allowed on your Internet Browser.
