EtherHaul™ 8000 Installation, Operation and Maintenance Manual
Page 48
5
Ethernet Ports Configuration and Monitoring
The Ethernet ports parameters and monitoring are managed in the Eth Ports page.
The radio has the following Ethernet interfaces:
Host – Management interface (internal bridge port)
Eth0 – Radio (RF) interface (internal bridge port)
Eth1 – Line interface, 1GE port
Eth2 – Line interface, 10GE combo ports (refer to the active port of the two)
o
RJ45 electrical (802.3an/bz)
o
SFP+ optical (SM or MM)
This chapter includes the following topics:
Settings
Advanced Settings
Maintenance
Statistics
CLI commands
5.1
Settings
Figure 5-1 Eth Ports Page: Settings
This section allows configuring the following parameters:
Port Type – RJ45 or SFP based on the physical port.
Eth1 1GE is fixed RJ45. For Eth2 10GE combo port, you can choose to work with
RJ45 or SFP+ or choose Auto that will automatically select (and fail over) to the
