EtherHaul™ 8000 Installation, Operation and Maintenance Manual
Page 41
3.6
Copy To Remote
You can find the
Copy To Remote
button next to some configuration parameters or
sections. This function copies configuration to remote system based on the changes on
the local system.
Figure 3-5 Copy To-Remote icon
Matching configuration may be of two types:
Identical configuration – exactly same configuration will be copied from the
local to remote system. It can be found for parameters that normally
requires identical configuration for both local and remote units.
For example, Mode configuration.
Matching configuration – for parameters that require matching but
opposite configuration.
For example: transmit frequency where Tx(local)=Rx(remote) and
Rx(local)=Tx(remote).
