SIIG US2265, Руководство пользователя

Страница: 8 / 48

Introduction
1-1
Thank you for your purchase of the USB 2.0+1394+UltraATA RAID .
SIIG’s goal is to provide its customers with reliable, high quality
products and customer support.
Before installing the board, please review this chapter for unpack-
ing instructions and an overview of the key features. Then refer to
later chapters for installation instructions.
1-1 Unpacking the USB 2.0+1394+UltraATA RAID
Before installing the board, verify that the following items are in-
cluded in the packaging carton:
• One USB 2.0+1394+UltraATA RAID controller
• Two driver diskettes
• Two 40-pin/80-wire Ultra ATA cables
• This comprehensive user’s manual
Please consult your dealer if any item is damaged or missing.
1-1.1 Static Electricity Precaution
One of the routine precautions you must be aware of when work-
ing with computer components is the problem of static electricity
discharge. Leave the product in its static-resistant bag until you
are ready to install it.
Caution: Static electricity discharge may permanently dam-
age your system. In order to avoid possible static electricity
discharge during installation procedures, please follow the
guidelines below:
• Discharge any static electricity build up in your body by
touching a large grounded metal surface or the
computer’s case (if plugged in), for a few seconds.
• Avoid any contact with internal parts and handle card
only by its edges.
Chapter 1
Introduction