SIIG US2265, Руководство пользователя

Страница: 26 / 48

Installation
3-5
9. Insert the USB 2.0 driver diskette.
10. Click Start , Run , type in A:\setup.exe , click OK .
11. Select Yes, I want to restart my computer now , remove the
driver diskette, and click Close to complete installation.
3-3.3 Windows 2000 Driver Installation
1. Boot up Windows. At the Found New Hardware Wizard
window, click Cancel twice.
2. Insert the USB 2.0 driver diskette. Click Start , Run , type in
A:\setup.exe , then click OK .
3. Choose Yes, I want to restart my computer now , and click
Close . Remove the driver diskette.
4. After Windows restarts, at the Add New Hardware Wizard ,
click Next .
5. Insert the UltraATA 100 RAID driver diskette. Choose
Search for a suitable driver... , click Next .
6. Check Floppy disk drives , uncheck the other boxes, then
click Next .
7. Click Next .
8. At the Digital Signature Not Found window click Yes . Our
driver has been thoroughly tested in Windows for stability. This
message appears because Microsoft has not tested this product
through WHQL certification.
9. Click Finish to complete driver installation.
3-3.4 Windows XP Driver Installation
If you have have XP Service Pack 1 or later installed, skip to step 8 .
Otherwise, complete all steps below.
1. Boot up Windows. At the
Found New Hardware Wizard
window, click Cancel .
2. Insert the USB 2.0 driver diskette. Click Start , Run , type in
A:\setup.exe , then click OK .
3. Click Continue Anyway . Our driver has been thoroughly tested
in Windows for stability. This message appears because Microsoft
has not tested this product through WHQL certification.