User's Manual
2-6
Note:
To optimize performance, configure both source drives
to be from different channels and configure both destination
drives to be from different channels.
6. Enter the first destination drive, then enter the second
destination drive.
7. Enter
Y
to accept the RAID configuration.
8. On the following screen press
ESC
to exit the RAID
configuration utility and reboot the computer.
9. Continue with Fdisk and Format steps as if you were
installing a conventional hard drive.
2-4 Deleting RAID Arrays
1. As the BIOS boots press
F3
when prompted to enter the
RAID BIOS utility.
2. Press
F1
to dissolve a RAID set.
3. Enter the number of the RAID set to be deleted.
4. Answer
Y
to remove the RAID set.
5. Press
ESC
when finished to reboot.
2-5 Using RAID Auto Setup
Each RAID array setup option comes with an Auto configuration
feature.
Use Auto Setup option with new or blank hard drives.
2-5.1 RAID 0 (Striping)
1. At boot press
F3
when prompted to enter the RAID BIOS
utility.
2. Press
F2
to create a RAID set.
3. Press
F1
to create a Stripe set.
4. Press
A
for Auto Setup.
5. Enter the total number of drives in the stripe set.
6. Press
Y
to accept the configuration.
7. Configure another RAID set or press
ESC
to reboot.
Содержание US2265
