5-3
5.3 WHERE TO MOUNT THE PAPER HOLDER
When determining the layout of paper holder, note the following:
•
When you use a paper roll, set the holder so that the paper is in alignment with the paper intake
with no horizontal offset, and that the center axis of the paper roll is parallel with the printer.
•
Keep the paper feed force 50 g or less.
5.4 WHERE TO MOUNT THE PAPER CUTTER
Install the paper cutter so that it does not interfere with the paper feed. The angles and positions for
feeding paper are shown in Figure 6-1.
•
If the distance between the edge of the thermal head and the edge of the fed paper is too small,
the paper may be caught by the platen. Please take this into account when designing.
•
Use a cutter with a sharp edge so that paper is cut with the paper hold force or less.
Содержание LTP3445
