8-4
➂
Automatic paper load
•
Assemble the guide in a position that contacts the side edge and back side of the paper so the
paper can be inserted smoothly. The guide should be assembled away from the printer for 1 mm or
less.
Figure 8-1 Guide Design Example
•
If the paper skews, place the thermal head into the up position and reset the paper.
•
Cut the edge of the paper so it is vertical to the direction of the paper feed.
•
If the thermal head has been in the down position for a long time, the paper will be unable to be
inserted because the head is in contact with the platen. In this case, place the head into the up
position once and insert the paper again.
GOOD
NO GOOD
NO GOOD
NO GOOD
NO GOOD
PAPER
GUIDE
Max. 1mm
GOOD
Содержание LTP3445
