Signode Tension-Weld BTS-16, Руководство по эксплуатации, частям и безопасности

Страница: 8 / 16

8
OPERATING INSTRUCTIONS, Continued
4. Push the BTS tool all the forward so that the straps
are fully seated into the base of the tool as shown.
5. Release the operator handle to secure the strap in
the tool. Press the weld button on the top of the
tool.
The BTS will then weld the strap together. As the
straps are welded together the BTS will also cut off
the top strap.
While operating, the weld button will glow the
color Red. Once the welding process has been
completed the weld button will continue to glow
Red indicating the wait period before removing the
tool.
NOTE: If the weld button immediately flashes Red
and the tool does not function the battery cell
needs to be charged.
6. Once the weld button begins to flash Green in
color, squeeze the operator handle to open the
tool and remove the tool from the strap.
Continue to remove the strap tensioner from the
strap.
Inspect the strap joint for proper formation using
the information found on the next page of this
manual