SIGNIFY EA0403, Инструкция по эксплуатации

Страница: 25 / 40

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0403 PRODUCT CODE: 46486 08/2017
25
button on the control panel or remote control (No. 10 on the control panel diagram and
No. 5 on the remote control diagram). The LCD display will show “P01” and at the bottom
of the LCD display the letters “PROG” will be flashing. “P01” indicates that the first
programmed track is to be set (Program 01). Press UP or DOWN buttons on the control
panel or the NEXT/F.F or PREV/F.B (No. 20 and 21 on the control panel diagram and No.
6 or 15 on the remote control diagram) to select the first track to be programmed. When
this track is reached press the PROG button again to set this track into “P01” (program
01). Once done “P02” will appear, indicating that the 2nd track to be programmed is to
be selected. The process to set track 02 is the same as the process already completed to
set track 01. This process will continue until all required tracks have been programmed, or
until all 99 program numbers (P01 - P99) have been filled. After you have selected the final
track in program mode ensure you press the PROG button one last time to save. Next,
press the PLAY button straight away on the control panel or remote control to play your
programmed tracks.
NOTE:
If there are many tracks saved on to the USB drive, it is suggested to listen
to the tracks first and record down the track numbers required to be programmed to
ensure that all tracks are programmed easily.
NOTE:
Not all 99 program numbers need to be programmed to use this feature. For
example, if only 5 tracks need to be programmed, once the PROG button has been
pressed to confirm the 5th track, simply press the
PLAY/PAUSE
button (No. 7 on the
control panel diagram and No. 13 on the remote control diagram) and the tracks will
start playing from P01 – P05.
When playing the programmed “playlists”, the user can still control the playing tracks
as mentioned previously in the instructions. The only exceptions are the folders cannot
be skipped or selected and Random mode cannot be selected. You can use the PAUSE
button and STOP button while in PROG mode. But ensure that the stop button is pressed
only once. After the STOP button is pressed, press the PLAY button to resume PROG
mode and the “playlist” will start again from the first track.
To exit the programmed tracks, press the STOP button twice, until the letters “PROG” are
no longer displayed at the bottom of the LCD Display. All tracks loaded on the USB drive
will now be played from the beginning again, when the PLAY/PAUSE button is pressed.
NOTE:
When exiting a programmed list, all programmed “playlists” will be lost. The
“playlist” will need to be programmed again, if required later.
Instructions (cont)