SIGNIFY EA0403, Инструкция по эксплуатации

Страница: 14 / 40

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0403 PRODUCT CODE: 46486 08/2017
14
On the rear of the Jukebox, there is an LED Light Mode Switch (No. 3 on the Jukebox
parts diagram) which has 2 settings; “
PLAY
” and “HOLD”. When switched to “PLAY”
mode, the Colour Changing LED Light Tubes will fade in and out across several different
colours continuously. When set to HOLD mode the LED Light Tubes will be illuminated
in only one colour. By switching to PLAY mode, the LED Light Tube will begin to cycle
through the colours. By switching back to HOLD , different colours can be selected to
display and hold (please note that these colours have been predetermined and may not
be the exact same colour as the light tube was illuminated when switched to the “HOLD”
mode).
To turn OFF the lighting effects all together, simply press the “
LIGHT
” button once again,
and all lighting effects will no longer be illuminated.
Using the Audio Functions
This Jukebox has several different functions for audio playback. Select between the CD
player, USB input, SD card input, analogue FM radio and Bluetooth
®
audio streaming.
First ensure that the Jukebox is powered ON by pressing the POWER button (No. 2 on
the control panel diagram) . When the unit is powered on the time will be displayed on the
LCD Display Panel (if the display reads “00:00” the time may need to be set, please see
instructions on Setting the Correct Time). Press the ON/OFF button on the control panel
or the POWER button on the remote control (No. 2 on the control panel diagram or No. 1
on the remote control diagram) to exit standby mode and enter FM Radio Mode.
Choosing the Correct Function to Use
To select between the different functions such as the FM tuner, CD player, USB input, SD
input or Bluetooth
®
streaming simply press either the MODE/DEV button on the control
panel or the FUNCTION button on the remote control (No. 6 on the control panel diagram
or No. 2 on the remote control diagram). Press either one of these buttons repeatedly until
you reach the function that you wish to use.
Changing the Volume
To increase the volume, simply press the VOL+ button on the control panel or remote
control (No. 4 on the control panel diagram and No. 14 on the remote control diagram).
Either press the VOL+ button repeatedly or press once and hold down until you reach the
desired volume level.
To decrease the volume, simply press the VOL- button on the control panel or remote
control (No. 5 on the control panel diagram and No. 4 on the remote control diagram).
Instructions (cont)