SIGNIFY EA0403, Инструкция по эксплуатации

Страница: 16 / 40

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0403 PRODUCT CODE: 46486 08/2017
16
Auto-Searching for FM Stations
The Jukebox features an auto-search FM tuner to assist in finding radio stations with
a strong enough signal to play. There are two ways that you can auto-search using the
tuner.
By pressing the AUTO button (No. 12 on the control panel diagram or No. 10 on remote
control diagram), the unit will perform an auto-search from the 87.5MHz upwards to find
several stations. The AUTO function will also save the stations into the memory of the
Jukebox. The Jukebox has a 20 station memory to store the user’s favourite radio stations
which are labelled P01 – P20 (Program 1 – Program 20). The first station that the tuner
finds will be saved into the Jukeboxes memory under P01, the second station that the
auto-search finds will be saved into the Jukeboxes memory under P02, and so on. This
will continue until the tuner has found all signals on the bandwidth OR until it has saved
stations into all 20 programs.
To auto-search for the nearest station ONLY, simply press and hold the UP or DOWN
button on the control panel or the PREV/F.B or NEXT/F.F button on the remote control
(No. 20 and 21 on the control panel diagram and No. 6 and 15 on the remote control)
for approximately 3 seconds and the tuner will automatically search up or down the FM
band (depending on the buttons pressed) to find the nearest station. When the tuner
finds a station that is strong enough it will stop searching and begin to play this station.
The station will also be displayed on the LCD Display Panel. You can repeat this process
until you find the desired station. This auto-search function will NOT save the stations
automatically and it will NOT continue to search past the first radio station found.
Manual Searching for FM Stations
To perform a manual search for a desired station, simply press (do not hold) the UP or
DOWN
button on the control panel or the PREV/F.B or NEXT/F.F button on the remote
control (No. 20 and 21 on the control panel diagram and No. 6 and 15 on the remote
control) and the tuner will search up or down (depending on the button pressed) the
FM band by 0.05Mhz increments for each press. Continue to press the UP and DOWN
or PREV/F.B and NEXT/F.F buttons until you reach the desired station. Be sure not to
press and HOLD the buttons – if you HOLD the buttons down the tuner will commence
the auto-search function. When you reach the desired station or frequency, the Jukebox
will start playing the desired station located on this frequency and display the station
frequency on the LCD Display Panel.
Programming FM Stations
The Jukebox has a 20 station memory to store the user’s favourite radio stations. When
in FM mode, simply tune the radio to the desired station. When the desired station has
Instructions (cont)