Signet 159 001 291, Руководство пользователя

Страница: 5 / 12

5 Signet 2537 Flowmeter
This table shows the de fi nition of each menu function, the setting parameters and the page where detailed instructions can be located.
Menu Function Defi nition Setting Parameters More Information On
Flow Unit Liters or Gallons per sec, min, hour or day See list on page 6 page 6
(K)Factor Set PULSES per VOLUME UNIT 0.0001 to 999999 page 6
Average Smooths out erratic fl ow conditions 0 to 100 seconds page 7
Sensitivity Overrides Average for large rate changes 0 to 9 page 7
P-Set Select the mode for the PULSE OUT Total or Divider page 8
P-Factor As PULSE
DIVIDER
, divides input freq. 1.0000 to 99999 page 8
P-Factor As PULSE
TOTAL
, multiplies K-Factor 1.0000 to 99999 page 8
Relay Logic Select Hi alarm or Lo alarm mode Hi or Lo page 9
Relay Set Set Relay Setpoint 0.0000 to 99999 page 9
Relay Hysteresis Rate inside Setpoint to DEENERGIZE relay 0.0000 to 99999 page 9
Relay Delay Time delay before relay is ENERGIZED 0000.0 to 6400.0 page 9
4 Set Set fl ow RATE to be represented by 4 mA 0.0000 to 99999 page 6
20 Set Set fl ow RATE to be represented by 20 mA 0.0000 to 99999 page 6
Contrast Adjust visibility of liquid crystal display 1 to 3 page 6
Operation
The 2537 Flowmeter is available in 4 different models. The
programming menus vary signi
fi cantly from one model to another.
This chart is provided inside the yellow cover to assist in
navigating the menus in the 2537.
T
P
t
T
P
t
T
P
t
T
P
t
View Mode Function
All models display the model name: •
PulSE
,
diGitAL
,
4-20
, or
On-OFF
.
If the white key (S1) is held down for 3 three seconds, the fl ow rate is displayed for 10 minutes •
before reverting back to the model name.
In the
PulSE
Model, if the “P-Set” menu item is set to “divider”, then the divided pulse output
will be displayed in pulses/seconds, (p/s).
This table shows the menu
sequence for each model.
Mode
View → Display Flow
Rate
→ Go to MENU Go to VIEW
Menu 1X → Next Menu 1X → Display
Current Val
Previous Mode
→ Go to Edit Previous Mode
1X → Shift digit
to right
Previous Mode
Edit 1X → Increment
Value
→ Go to SAVE Previous Mode
SAVE 1X → Toggle 1X → Store
Change
N/A