background image

7

Signet 2537 Flowmeter

 

t

T

P

t

T

P

T

P

t

2s

2s

x2

x5

1.

2.

3.

4.

5.

Set Averaging

Minimum value

Maximum value

T

P

t

P

T

t

T

P

t

T

P

t

This function is available on 
these versions of the 2537:

2s

Go to next
menu item

Return to
Normal Operation

Save the new setting:

Example:
Set the Averaging for 50 seconds.

Set Sensitivity

Minimum value

Maximum value

2s

2s

x3

x5

T

P

t

T

P

t

T

P

t

1.

2.

3.

4.

This function is available on 
these versions of the 2537:

T

P

t

P

T

t

T

P

t

T

P

t

2s

Go to next
menu item

Return to
Normal Operation

Save the new setting:

Example:  Set the Sensitivity to 5.

10 s

2 s

20 s

30 s

40 s

50 s

60 s

70 s

No AVERAGING, no SENSITIVITY

With AVERAGING set to 0 (zero) and with SENSITIVITY set to zero, 
the 2537 responds to every unstable shift in the 

fl

 ow.  The dashed 

red line represents the actual output of the 

fl

 ow sensor in unstable 

fl

 ow conditions.

With AVERAGING set to 50 seconds and SENSITIVITY still set to 
zero the 

fl

 ow rate is stabilized, but a sharp change in 

fl

 ow rate is not 

represented for 50 seconds or longer. (dotted green line).

With AVERAGING at 50 seconds and SENSITIVITY set to 4 OR 5, 
the 

fl

 ow rate is stabilized, while the sudden shift in 

fl

 ow is re

fl

 ected 

very quickly. (Solid blue line)

NOTE:  The SENSITIVITY function is ineffective if the AVERAGING function is set to zero (seconds).

AVERAGING only

AVERAGING and SENSITIVITY

Averaging and Sensitivity Settings

• Because 

ideal 

fl

 ow conditions are often impossible to achieve, the 

fl

 ow rate is often erratic, which causes any control features (ie; 

relays, 4-20 mA loops, etc.) that are associated with the 

fl

 ow rate to be erratic.

• 

The best solution to these problems is to correct any piping de

fi

 ciency that causes the instability.  This may involve longer straight 

runs upstream, reducing the pipe size to maintain a full pipe at all times, and other installation changes.  But in many situations 
these measures are simply not possible.

• 

The 2537 meter provides two tools that are designed to "work around" these de

fi

 ciencies.  The Averaging and the Sensitivity 

features should be studied before making adjustments.

Averaging Time in Seconds (Factory set: 0 seconds)

• 

Set the time the meter will use as the averaging period.  The range is from 0 (no average applied to input) to 100 (seconds of 
averaging applied to input).

 

Use higher averaging times to smooth the display and current output where the 

fl

 ow in the pipe is erratic.

Quick Response Sensitivity (Factory set:  0)

• 

Set the relative degree of change in the 

fl

 ow rate required to allow the 2537 to disable the AVERAGING and jump to a new 

fl

 ow 

rate immediately.  The scale is from 0 (Least sensitive, averaging is never disabled.) to 9 (a very small change in 

fl

 ow rate will 

disable the averaging).

The factory setting is 0 (zero).

The factory setting is 0 (zero).

Содержание 159 001 291













Отзывы: