Signature Kitchen Suite SKSUD2402P, Руководство по установке

Страница: 15 / 28

15 INSTALLATION
ENGLISH
2
Turn the screws as shown above to raise the appliance. Turn the screws in the opposite direction to
lower the appliance.
3
Make sure the weight of the refrigerator is carried on the legs, not the wheels.
4
Use a smartphone leveling app or place a carpenter's level on the top and sides of the appliance to
check that it is level and plumb. Or use the provided gauge tool to measure the distance of the
bottom edge of the appliance from the floor at the front corners.
WARNING
• To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with the
floor.
CAUTION
• If using a power drill, use the lowest torque setting.
• Leave at least 3/8 inch (10 mm) between the top front of the appliance and the top of the enclosure to fit
the top filler strip.
• Do not exceed 20 inch-pounds (2.25 Nm) of torque.
• 20 revolutions equal 1/16” (2 mm) of height adjustment.
Attaching Appliance to Enclosure
• Tighten the side fixing bracket to the bottom left and right sides of the cabinet using the B type and C-1
type screws.
Left
Rear
Raise
Product
Raise
Product
Rear Front Front
Right