Signature Kitchen Suite SKSUD2402P, Руководство по установке

Страница: 6 / 28

6 INSTALLATION
WARNING
• The receptacle must be installed by a licensed
electrician only.
Grounding
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of
least resistance for the electric current.
WARNING
• Improper connection of the equipment
grounding conductor may result in electric
shock. Have the appliance checked by a qualified
electrician or service technician if you are in
doubt as to whether the appliance has been
properly grounded.
NOTE
• Some local regulations may require a separate
ground. In such cases, the required ground wire,
clamp and screw are available as a separate
accessory and must be purchased separately.
• Never ground the appliance to plastic plumbing
lines, gas lines or water pipes.
Cutout Dimensions
CAUTION
• The Anti-Tip bracket should be firmly fixed to a
concrete wall/wood with strength of 15 t or
greater, or a wall with equivalent strength. (The
structure where the bracket is fixed should be a
solid structure that can withstand a force of 70
kgf or greater.)
• Before installing the appliance, be sure to check
if the size of built-in furniture is correct. To
ensure correct appliance operation, the cut part
of the front bottom plate located at the bottom
of the device should be aligned with the center
of the device.
• A minimum 4" (101 mm) finished return that
matches the cabinet exterior is recommended
on all sides and the top of the cutout opening.
The shaded area will be visible after installation.
- SKSUD2402P SKSUW2401P
A
2 24" (610 mm)
B
2
24" (610 mm)
C
2 34 1/2" (876 mm)
D 4" (101 mm)
E 23 11/16" (602 mm)
F 30 5/16" (770 mm)
A
B
C
D
E
F
SKSUD2402P
SKSUW2401P
A
C
D
F
B
E