Signature Kitchen Suite SKSUD2402P, Руководство по установке

Страница: 3 / 28

3 IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
WARNING
• TIP-OVER HAZARD
- Use two or more people to move and install the refrigerator. To prevent the refrigerator from tipping
over, install anti-tip brackets (provided). Failure to follow the refrigerator installation instructions can
result in serious injury or death.
• To reduce the risk of fire, electric shock, or personal injury when using the product, basic safety
precautions should be followed, including the following. Read all instructions before using this
appliance.
Installation
• These products are not designed to be used as freestanding units. Doing so will result in a risk of tipover,
personal injury, and product or property damage.
• Do not install the refrigerator near a gas stove, water heater or other source of ignition that may
possibly leak gas. Do not install product in direct sunlight. Install the product in a wellventilated area.
• Ensure that enclosure dimensions allow for sufficient air circulation at the sides and back of the product.
Do not block the front air inlet. Failure to follow these instructions may cause product malfunction.
• Enclosure must be constructed of materials which are strong enough to avoid damage during
installation and frequent use.
• Cabinet materials must be able to withstand the heat and humidity produced during product operation
and use without twisting or deforming.
• Install the product on a firm, level surface that can support the weight of the product without bending.
The product must be level both horizontally and vertically.
• Keep children away from area during installation.
• Do not use an extension cord or power strip with this product.
• Do not install the refrigerator in a damp location or where it will be exposed to running water.
Deterioration of the insulation on electrical parts may result, causing risk of electric shock.
• Connect to potable water only. Non-potable water can cause health risks.
• If connected to a circuit protected by fuses, use time delay fuse.
Electrical Connection
• Use a dedicated outlet.
- Plugging several devices into one outlet may cause a fire.
• Plug in the power plug with the power cord facing downward.
- Failure to do so could damage the plug or cord, resulting in fire or electric shock.
• When installing or moving the refrigerator, be careful not to roll over or damage the power cord.
Do not squeeze or crush the cord or plug when pushing the refrigerator in.
- Doing so could result in fire or electric shock.
• Do not allow the power cord to be bent, crushed, or damaged. Do not run the power cord under
heavy objects like furniture, other appliances, or through high-traffic areas.
- Doing so may damage the power cord and result in fire or electric shock.
• Do not extend or modify the length of the power cord.
- Use only an exact factory replacement part to avoid electrical issues, fire, or electric shock.
• Turn off the power before cleaning or moving the refrigerator.
- Failure to do so may cause electric shock or injury.