4
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
- Press the POWER button for 3 seconds to turn off the power at display panel.
•
Do not pull out the cord or touch the power plug with wet hands.
- Doing so may cause electric shock or injury.
•
Remove water or dust from the power plug and insert it securely into the wall socket.
- Dust, water, or a loose connection may cause a fire or electric shock.
•
Do not unplug the refrigerator by pulling on the cord.
- Doing so may cause electric shock or short circuit resulting in a fire.
•
Do not use the power cord or the power plug if it is damaged or if the outlet is damaged.
- Doing so may cause electric shock or short circuit resulting in a fire.
•
Wait for 5 minutes or longer when reconnecting the plug or turning the power back on.
- Give the compressor time to cycle before restarting.
•
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
CAUTION
•
Do not stick your hands under the refrigerator.
- Sharp edges, fans, and wires may cause an injury.
•
Save these instructions for the local inspector's use.
•
Observe all governing codes and ordinances.
•
Installer: Leave these instructions with the consumer.
•
Consumer: Keep these instructions with the owner's manual for future reference.
General
These installation instructions are intended for use by qualified installers. All connections for water,
electrical power and grounding must comply with local codes and ordinances and be made by licensed
personnel when required. In the absence of a local code:
• In the U.S.A., in accordance with the National Electric Code, ANSI/NFPA70 – latest edition/State and
Municipal codes and/or local codes.
• In Canada, in accordance with the Canadian Electric Code C22.1 – latest edition/Provincial and Municipal
codes and/or local codes.
Содержание SKSUD2402P
Страница 28: ......