Signamax
065-1163 F series RS-232/422/485 to 100BaseFX Media Converter
Configuration
24
communication is idle
set xfer
–
the command is for RS232
configuration and data
communication setting. The
command syntax is as shown
below:
set xfer [arg_1 data_1] [arg_2 data_2] ...
[arg_n data_n]
[Argument List]
idle........... Set idle time of serial port
type… … … Set operation type (AUTO, SERVER or
CLIENT)
remote...... Set remote IP address
port........... Set TCP port number
baud......... Set baud rate of serial port
parity......... Set parity of serial port
length....... Set word length of serial port
stopbits...... Set stop bits of serial port
flow............ Set flow control type for serial port
statistics..... Clear statistics
upgrade:
Reloads configuration file or upgrades run-time
firmware.
upgrade config:
Use this command to reload previously
saved configurations. For this operation
to be successful, type in the IP address
