SIGMATEK MDD 111-1, Руководство пользователя

Страница: 19 / 84

MDP 102-1
29.08.2019 Page 19
2.8 Technical Data Power Supply Module 230 V
DIM MDP 102-1
Article number 09-403-102-1
Hardware version 3.x
Rated Data
Rated mains voltage (symmetrically to
ground) maximum 5000 rms symmetrical
amps (L1, L2, L3)
V
AC
1 or 3 x 115 V
-10%
/ 1 x 230 V
+10%
,
45 - 65 Hz
Maximum peak current at switch on of the
mains contactor (limited by the inrush
circuit)
A 2
Rated installed power for S1 operation kVA 2
Rated installed power for S1 operation for
input voltage < 230 V
VA 2 kVA
– 8.7 W * (230 – input voltage/V)
Rated DC-link voltage V
DC
150 - 360
Over voltage protection threshold of DC-link
voltage
V
DC
450
Auxiliary supply v24 V V
DC
22 - 30
Maximum leakage current mA 30
Power of additional supply v24 V W Max. 50
Holding brake supply v24 V-BR V
DC
23 - 26
(depending on type of selected holding brake)
Regen Circuit
DC-Link capacitance µF 540
G-VMAINS = 230 (rated mains voltage = 230 V)
Switch-on threshold V
DC
420
Switch-off level V
DC
400
Over voltage protection V
DC
450
Peak power of the internal regen resistor
(max. 1sec)
kW 5.3
Safety Input
Input voltage between ENABLE_H (+) and
ENABLE_L (-)
V Typically 24, max 30 V
Signal level between ENABLE_H (+) and
ENABLE_L (-)
V
Low ≤ +5, High ≥ +15
Input current mA Typically 10 at 24 V
Switching delay times of the inputs s
Switch-on about 0.02
Switch-off minimum 0.5, maximum 1 s
Relay output (S1, S2) - NO
Switching capacity - Max. 30 V
DC
, 42 V
AC
, 100µA to 0.5 A
Digital Input
Input voltage Dig_IN1 to Dig_IN8 V Typically 24, max 30 V
Signal level V
Low ≤ +5, High ≥ +15
Input current mA Typically 10 at 24 V
Switching delay times of the inputs ms Typically 0.1