SIGMATEK ETT 736, Руководство по эксплуатации

Страница: 41 / 54

TOUCH OPERATING PANEL ETT 736
12.01.2022 Page 39
106
C_UNKNOWN_CID
An unknown object from a stand-alone or
embedded object, or an unknown base
class was detected.
107
C_UNKNOWN_CONSTR
The operating system class cannot be
created; the operating system is probably
wrong.
108
C_UNKNOWN_OBJECT
Indicates an unknown object in an inter-
preter program; more the one DCC080
object.
109
C_UNKNOWN_CHNL
The hardware module number is greater
than 60.
110
C_WRONG_CONNECT
No connection to the required channels.
111
C_WRONG_ATTR
Wrong server attributes.
112
C_SYNTAX_ERROR
Non-specific error. Recompile and
download all project sections.
113
C_NO_FILE_OPEN
An attempt was made to open an
unknown table.
114
C_OUTOF_NEAR
Memory allocation failed
115
C_OUT OF_FAR
Memory allocation failed
116
C_INCOMAPTIBLE
An object with the same name already
exists but has a different class.
117
C_COMPATIBLE
An object with the same name and class
exists but must be updated.
224
LINKING
The application is currently linking.
225
LINKING ERROR
An error has occurred while linking.
226
LINKING DONE
Linking is complete.
230
OP BURN
The operating system is currently being
burned into the Flash memory.
231
OP BURN FAIL
An error has occurred while burning the
operating system.
232
OP INSTALL
The operating system is currently being
installed.
240
USV-WAIT
The power supply was disconnected; the
UPS is active.
The system is shutdown.
241
REBOOT
The operating system is restarted.
242
LSL SAVE
243
LSL LOAD