Version 06/2007, Rev. 1.15 of 16/09/2011 - sb
page 26 of 75
Translation of the original operating manual
5.1.2
Construction and Constructive Safety Measures
The centrifuge is installed within a solid construction. On the back, the lid is
secured by solid hinges and on the front by one lid lock.
5.1.3
Drive
The drive motor is a well-dimensioned, collector-less asynchronous motor.
5.1.4
Operation and Display
The display is a hermetically sealed LCD display. It is operated by way of two
rotary knobs and indicates the operating statuses.
5.1.5
Electronic System
The microprocessor-controlled electronic system ensures a wide range of
adaptations of the centrifuge for various tasks. The following parameters can be
set:
•
Speed in steps of 1 or 100 rpm
•
Relative centrifugal force RCF in steps of 1 or 10 x g
•
Time between 10 sec and 11h 59min max.
•
Continuous run
•
Short run
•
Rotor preselection
•
Acceleration and deceleration curves
•
Storage and call-up of programs
