Sigma 2-16P Скачать руководство пользователя | Manualshive

Страница: 48 / 76

background image

Laboratory Centrifuge Sigma 2-16P

8 Maintenance and service

48 / 76

Version 04/2007, Rev. 2.23 of 28/04/2022

• sb

Translation from the original operating manual, part no. 0700602

Pos : 163 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/080 War tung und I nst andhaltung/ 080 Wart ung und I nst andhaltung ========================= @ 28\m od_1405320612731_68. docx @ 194789 @ 1 @ 1

→

8

Maintenance and service

The centrifuge, rotor, and accessories are subject to high mechanical
stress. Thorough maintenance performed by the user extends the service
life and prevents premature failure.

CAUTION

If corrosion or other damage occurs due to improper care, the
manufacturer cannot be held liable or subject to any warranty claims.

• Use soap water or other water-soluble, mild cleaning agents with a pH

value between 6 and 8 for cleaning the centrifuge and accessories (see
also chapter 8.2 - "Sterilisation and disinfection of the rotor chamber
and accessories").

•  Avoid corrosive and aggressive substances.
•  Do not use solvents.
•  Do not use agents with abrasive particles.
•  Do not expose the centrifuge and rotors to intensive UV radiation or

thermal stress (e.g. by heat generators).

Pos : 164 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1

Pos : 165 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/080 War tung und I nst andhaltung/ 080-0010 W artungsar beiten--------------------------------------- @ 28\mod_1405320613978_68. docx @ 194803 @ 2 @ 1

→

8.1

Maintenance

Pos : 166 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/080 War tung und I nst andhaltung/ 080-0010- 0010 Zentrif uge @ 28\mod_1405320615295_68. doc x @ 194817 @ 3 @ 1

→

8.1.1

Centrifuge

• Unplug the mains power plug before cleaning.
• Carefully remove all liquids, including water and particularly all the

solvents, acids, and alkaline solutions from the rotor chamber using a
cloth in order to avoid damage to the motor bearings.

• If the centrifuge has been contaminated with toxic, radioactive, or

pathogenic substances, clean the rotor chamber immediately with a
suitable decontamination agent (depending on the type of
contamination).

WARNING

Take suitable precautions for your own safety if there is a risk of toxic,
radioactive, or pathogenic contamination.

• After every cleaning process, grease the motor shaft slightly with a

small amount of heavy-duty grease for load-bearing bolts (part no.
71401) and distribute the grease with a cloth so that it forms a thin
layer.

Pos : 167 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1

«
...
46
47
48
49
50
...
»

Содержание 2-16P













































































Отзывы:

Нет отзывов

Похожие инструкции для 2-16P

Бренд: Nektar Страницы: 3

Бренд: Youkey Страницы: 86

Бренд: Haag-Streit Страницы: 16

Бренд: Pari Страницы: 11

Бренд: Pari Страницы: 2

Бренд: Haas Страницы: 5

Бренд: Quark-Elec Страницы: 2

Бренд: Yamaha Страницы: 29

Бренд: Additel Страницы: 107

LED PL G24d TC-D

Бренд: Bailey Страницы: 2

Бренд: Branick Страницы: 7

Бренд: Asaklitt Страницы: 5

Бренд: halstrup-walcher Страницы: 47

Бренд: Haenim Страницы: 19

Бренд: Burster Страницы: 6

Бренд: Analytic Jena Страницы: 62

Бренд: bort medical Страницы: 4

Бренд: PerkinElmer Страницы: 285

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды