Refrigerated Centrifuge with Heating System Sigma 4-16KHS
6 Using the centrifuge
36 / 91
Version 10/2012, Rev. 1.22 of 08/05/2020
• sb
Translation of the original operating manual, part no. 0701802
Pos : 124 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/060 Betrieb_Spi nc ontr ol L+S/ Spinc ontrol S (Z ent7)/ 060- 0030-0020 M anuell er Betri eb @ 27\m od_1405320198028_68. docx @ 193151 @ 3 @ 1
→
6.3.2
Manual mode
Pos : 125 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/060 Betrieb_Spi nc ontr ol L+S/ Spi nc ontrol S (Z ent7)/ 060- 0030-0020-0010 St art en ei ner Z entrif ugati on @ 27\m od_1405320199237_68. docx @ 193165 @ 4 @ 1
→
6.3.2.1
Starting a centrifugation run
The centrifuge is ready for operation when the start key is illuminated.
• Press the start key in order to start a centrifugation run.
Pos : 126 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 127 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/060 Betrieb_Spi nc ontr ol L+S/ Spinc ontrol S (Z ent7)/ 060- 0030-0020-0020 U nt erbr ec hen einer Z entrifugation @ 27\mod_1405320200374_68. doc x @ 193179 @ 4 @ 1
→
6.3.2.2
Interrupting a centrifugation run
• Press the stop key in order to interrupt a centrifugation run. The
centrifugation run will be terminated prematurely.
Quick stop
• Press the stop key for more than three seconds.
The centrifuge decelerates with the maximum deceleration curve.
After a quick stop, the centrifuge lid must be opened before a new
centrifugation run can be started.
A quick stop can also be triggered during a normal deceleration, e.g. in
order to speed up the deceleration.
When a quick stop is triggered, “Quick stop” will be displayed in the speed
field.
NOTE
A quick stop can be performed even if the centrifuge is blocked against
unauthorised use.
Pos : 128 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 129 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/060 Betrieb_Spi nc ontr ol L+S/ Spinc ontrol S (Z ent7)/ 060- 0030-0020-0030 U nt erbr ec hen eines Brems vorgangs @ 27\m od_1405320201742_68.docx @ 193193 @ 4 @ 1
→
6.3.2.3
Interrupting a deceleration process
• Press the start key during a deceleration process in order to interrupt it
and to restart the centrifuge.
Pos : 130 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 131 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/060 Betrieb_Spi nc ontr ol L+S/ Spinc ontrol S (Z ent7)/ 060- 0030-0020-0040 Auswahl, Anzeig e und Änderung von D at en @ 27\m od_1405320202914_68.docx @ 193207 @ 4 @ 1
→
6.3.2.4
Selection, display, and modification of data
The "Standard" menu is displayed.
• Turn the function knob in order to select a field. The selected field is
inverted.
• Press the function knob. The display starts to flash and the modification
mode is active.
• Turn the function knob in order to modify the set value of the selected
field.
• Press the function knob again to confirm the entry and to quit the
modification mode.
Pos : 132 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
