Make sure the wall or place of pole for mounting is not covered or affected by the surrounding metallic objects;
Using the metal tubing and fittings for interconnection between process pipe and sensor process connector;
The metal tubing and fitting materials, and size must be sizing properly to suit the process conditions;
It is better to install the isolation valve next to sensor process connector.
Steps for battery installation:
Step 1: Turn the front cover of the sensor counter-clockwise;
7.2.2 Remote mounting on wall or pole
7.3 Battery installation
DANGER:
DO NOT REPLACE BATTERY AT HAZARDOUS LOCATION!
DO NOT OPEN THE COVER AT HAZARDOUS LOCATION!
ONLY OPEN COVER AND REPLACE BATTERY IN SAFE AREA!
